Cisco WAP2000 Administration Manual page 35

Configuring the WAP2000 Access Point
Configuring Wireless Settings
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
Cisco WAP2000 Wireless-G Access Point with Power Over Ethernet Administration Guide
The access point automatically chooses the encryption algorithm used by each
client device.
To configure the WPA2-Personal Mixed wireless security settings for the access
point, follow these steps:
Click Wireless > Security.
From the Security Mode drop-down menu, select WPA2-Personal Mixed.
To enable wireless isolation across SSIDs, select Enabled from the drop-down
menu. Otherwise, select Disabled.
To enable wireless isolation within SSID, select Enabled from the drop-down
menu. Otherwise, select Disabled.
Provide the following information:
• Encryption—Mixed Mode automatically chooses TKIP or AES for data
encryption.
• Shared Secret—Enter a shared secret of 8–63 characters.
• Key Renewal Timeout—Enter a key renewal timeout period, which instructs
the access point how often it should change the encryption keys. The default
is 3600 seconds.
Click Save.
6
30