Configuring Administration Settings - Cisco WAP2000 Administration Manual

Configuring the WAP2000 Access Point

Configuring Administration Settings

Configuring Administration Settings
Cisco WAP2000 Wireless-G Access Point with Power Over Ethernet Administration Guide
This section describes how to configure the administration settings of the access
point:
• Configuring Management Settings, page 52
• Configuring the Administration Log, page 55
• Restoring Factory Default Settings, page 57
• Upgrading the Firmware, page 58
• Rebooting the Access Point, page 59
• Managing the Access Point's Configuration, page 60
6
51