Default Settings; Mounting The Cisco Wap131; Placement Tips - Cisco WAP131 Quick Start Manual

Wireless-n dual radio access point with poe.

Hide thumbs Also See for WAP131:

Table of Contents

POWER—The POWER button is used to turn the power on and off. It is not

applicable when using PoE.

12V DC—The 12V DC jack is used to connect the supplied power adapter

to the Cisco WAP131 if you are not using PoE.

Kensington Lock Slot—The Kensington lock slot is used to attach a cable

and lock to the Cisco WAP131.

Default Settings

Parameter

Username

Password

LAN IP Address

Fallback LAN IP

Subnetwork Mask

If you are using a Cisco Small Business RV Series router, the default range

for the DHCP assigned address is from 192.168.1.100 to 192.168.1.254.

Any device connecting to the same LAN will be assigned an IP address in

this range.

You can place the Cisco WAP131 on a desktop.

• Ambient Temperature—To prevent the Cisco WAP131 from

overheating, do not operate it in an area that exceeds an ambient

temperature of 104°F (40°C).

• Air Flow—Both side panels have vents that must be unobstructed to

prevent overheating.

• Mechanical Loading—The Cisco WAP131 should be level, stable, and

secure to prevent it from sliding or shifting out of position.

Cisco WAP131 Quick Start Guide

Default Value

cisco

DHCP address assigned by server

192.168.1.245

255.255.255.0

Table of Contents