Mounting The Cisco Wap581 Wireless-Ac/ N Premium Dual Radio Access Point With Poe Setup; Placement Tips; Wall And Ceiling Mounting - Cisco Wap581 Quick Start Manual

If your network does not have an existing DHCP server, the WAP581 will
start a DHCP server for WLAN stations and stop the DHCP client when
WAP581 is in factory default. The DHCP server will assign the IP address
from 192.168.1.20 to 192.168.1.100.
Mounting the Cisco WAP581 Wireless-AC/
3
N Premium Dual Radio Access Point with
PoE Setup
You can place your access point on a desktop, or mount it on a wall or
ceiling.

Placement Tips

• Ambient Temperature—To prevent the access point from overheating,
do not operate it in an area that exceeds an ambient temperature of
104°F (40°C).
• Mechanical Loading—The device should be level, stable, and secure
to prevent it from sliding or shifting out of position.

Wall and Ceiling Mounting

The Cisco WAP581 can be wall or ceiling-mounted. There is a mounting kit
packed with your device. The kit is designed to install your device to the
wall or the ceiling.
The mounting bracket has some flexibility so that you can reuse existing
holes drilled for a Cisco WAP551 or WAP561 device. The installer can
remove the Cisco WAP551 or WAP561 and mount the Cisco WAP581. You
will need 4pcs of anchors and screws to mount the device.
The dimensions for the mount kit screws are as follows
Cisco WAP581 Wireless Access Point 3