AEG AR 4023 DVD Instruction Manual page 28

ENGLISH
28
4 CLK button
a) Display the time
Press this button in CD-, USB-, CARD-, or AV
mode to briefly display the time in the lower right
hand corner of the LCD display.
b) Setting the time manually
• Hold down the button to set the time manu-
ally, if it is not automatically set via the RDS
signal. Automatic setting of the time may take
a few minutes. The hours flash.
• Set the time with the multifunction control
(12). Press the CLK button. The minutes flash.
• Set the time with the multifunction control
(12). The settings are automatically applied.
5 MODE Button
Press this button to select the CD/DVD player, AV-, or
radio mode.
NOTE:
The CD, USB and CARD Mode can only be selected if
you have connected or inserted the corresponding
storage device.
6 / Buttons
a) In Radio mode:
For manually setting the radio station.
b) In CD/DVD mode:
Press the or button briefly to jump forwards
or backwards. If you would like to scroll the titles
of the tracks keep the
pressed.
IR (Infrared)
7
Sensor for the remote control.
8 LCD (liquid crystal display)
AV IN Jack
9
To connect analogue replay devices. Using this socket
it is possible to hear the sound of other playback
devices such as MP3 players, CD players etc. through
the loudspeaker.
1. Please connect the external device with a 3.5 mm
stereo jack plug to the AV IN socket.
2. Press the MODE button (6) repeatedly until "AV"
appears in the display.
3. You now hear the sound from the external device
played back through the loudspeakers.
4. With the multifunction controller (12) you can
change the volume.
5. For the remaining procedure please see the oper-
ating instructions of the external sound source.
or arrow button
NOTE:
Adjust the volume of the external device to a com-
fortable level.
10 PTY button
Radio Operation:
PTY Selection of the Programme Type
Besides the station name, some FM stations also
transmit information on the type of programme. This
information can be displayed by your car radio.
Examples of such types of programme are:
SPORT NEWS
With the PTY function you can specifically select
stations transmitting a particular type of programme.
Press the PTY button, to activate the function. Then
turn the multifunction control (13) to make the selec-
tion in the PTY. The message "PTY SEEK" then appears
briefly in the display.
When PTY has been selected the radio starts searching
for corresponding PTY information and stops when
the PTY information has been found.
If the searched program type is not found, the device
returns to the last listened to radio station.
If the PTY information being searched for no longer
exists, the PTY function automatically switches to
normal mode.
11 AF/TA Button
a) TA Traffic Announcement
(Priority for Traffic Information)
The TA function is activated by pressing the AF/TA
button briefly. The TA symbol appears in the dis-
play. During radio operation in one FM frequency
band the search for a traffic announcement
station is started automatically (SEEK TA).
If an FM station is being received which transmits
the latest traffic announcements from time to
time, the TP display lights up.
When the TA function is switched on, the FM
traffic announcements automatically interrupt
CD operation (The word TRAFFIC appears in the
display).
NOTE:
The volume for traffic information is present
and cannot be adjusted.
After the traffic announcement has finished,
the programme that was previously running is
resumed.
POP CLASSICS