Start / Pause Button - Electrolux ENV06 Service Manual

4.11 START / PAUSE button

After the START / PAUSE button has been pressed, the
programme will start.
On models with LCD the drying, anti-crease and cooling
phases are indicated from left to right, and in models
without LCD the LEDs light up from the top downwards.
On some models without LCD only the drying phase and
the end of cycle are shown.
Changing the programme
To change a programme that has been selected by
mistake once it has started, first turn the programme dial
to 0 (OFF) and then select the new programme.
Once a programme has started, it cannot be changed
directly.
Any attempt to change the programme using the selector
or a function button will cause the indicator light over the
START / PAUSE button to flash and the buzzer will emit a
series of sounds, but the programme itself will not be
changed in any way.
ADL 2010 / 01 13/57 599 72 63-27