Table of Contents
Advertisement
The Control Panel
1 Programme Chart
This will help you to select the correct programme
for drying.
2 Door Opening Button
Press this button to open the door.
3 ON/OFF Button
By depressing this button the machine switches on.
By depressing it again the machine switches off.
4 Mains-On Light
This lights up by depressing the ON/OFF button to
switch the machine on and goes out when the
machine is switched off.
5 Low Temperature Button
Press this button to reduce the temperature when
drying particularly delicate items. The corresponding
pilot light comes on.
6 Buzzer Off Button
During the anti-crease phase, the buzzer will sound
intermittently. Depress this button to switch off this
function. The corresponding pilot light illuminates.
1
2 3 4 5 6
7 Start Button
Press this button for about 2 seconds to start the
selected drying programme.
If the door is opened during drying programme, this
button has to be depressed after closing the door to
re-start the programme.
8 Programme phase indicator
The different lights indicate the following functions:
Drying Light
This light indicates that the machine is performing
the drying phase.
Cool Tumbling Light
This light will illuminate when the cooling phase is in
operation. This starts 10 minutes before the end of
drying to prevent any creasing or crumpling of
fabrics.
If light
or
re-started.
End of programme
Crease
These lights flash alternatively at the end of the
drying programme: the laundry can be removed. If
you do not remove the laundry, the machine will
carry out automatically the anti-crease phase which
lasts approx. 30 minutes.
If only the light
crease phase has finished.
7 8
9
flashes, the programme has to be
& Anti-
Lights
flashes this means that the anti-
E D E 421 E
7
Advertisement
Table of Contents
