Qos Qcl Status; Qos Qcl Refresh - Interlogix IFS NS3502-8P-2S User Manual

Parameters:
<qce_id>: QCE ID (1-256), default: Next available ID
Default Setting:
disable
Example:
Enable multicast storm control in 2fps
NS3502-8P-2S:/> QoS Storm multicast enable 2

QoS QCL Status

Description:
Show QCL status. This can be used to display if there is any conflict in QCE for different user
types.
Syntax:
QoS QCL status [combined|static|voice_vlan|conflicts]
Parameters:
combined|static|voice_vlan|conflicts: combined
static
voice_vlan
conflicts
(default

QoS QCL Refresh

Description:
Resolve QCE conflict status. Same H/W resource is shared by multiple applications and it may
not be available even before MAX QCE entry. So user can release the resource in use by other
applications and use this command to acquire the resource.
Syntax:
QoS QCL refresh
Parameters:
combined|static|voice_vlan|conflicts: combined
static
voice_vlan
: Shows the static user configured status
: Shows the status by Voice VLAN
: Shows all conflict status
: Shows the combined status)
: Shows the static user configured status
: Shows the status by Voice VLAN
: Shows the combined status
: Shows the combined status
507
IFS NS3502-8P-2S User Manual