Paper Ribbon Sensor Test - ELCOM Euro-50T Mini User Manual

Helpful advice

Paper ribbon sensor test

The display will show the current state of paper ribbons present in the sensors. Installing and removing
paper from the sensors changes the status depicted on the display, depending on the presence of the
paper in the sensor.
Procedure for starting the test:
Sequence of steps
In the P mode, use the
menu pre test to enter the menu for testing the paper ribbon sensor
(P-mode – Sys. parameter – Tests):
Confirm by pressing
inserted in the printer, this will appear on the display:
If there is an error in one of the thermal papers, the display will show
Complete the test by pressing
82
 
or buttons and press

TOTAL . If both thermal ribbons are correctly

TOTAL .
Display

TOTAL do
Tests
Paper ribbons
Paper OK
žurnal OK
Paper OK
Žurnal error
Test OK