Typical Installation Options - kozy heat SLA-42 Installation And Operation Manual

TYPICAL INSTALLATION OPTIONS

Kozy Heat wall pass-thru (#800-WPT or #800-WPT2) must be used on all horizontal vent runs.
Follow instructions on page 16 of this installation manual.
IMPORTANT The horizontal heat shield included with this fireplace must be installed when incorporating minimum horizontal venting.
This applies to Nat. and LP minimum horizontal venting configurations.
Horizontal vent heat shield not shown in illustrations below for clarity purposes only.
HORIZONTAL INSTALLATION
Figure 12a
VERTICAL INSTALLATION
Figure 12b
CORNER INSTALLATION
Figure 12c
12