Hatteland HD 12T21 MMD User Manual page 66

OSD Menu Functions
Management Settings
|---2---
Filter (applies for VGA1 signal input only) is a Signal Noise Reduction technique to enhance
a possible weak or bad RGB/VGA signal. It will remove certain types of noise patterns typically
apparent in close proximity of other electronic equipment with less or lack of proper shielding to
prevent interference.
Settings as follows:
"Filter"
● Note: Default is "OFF"
Management Settings
|---2---
Set to either "Enable" or "Disable". More information available later.
Management Settings
|---2---
Set to either "Enable" or "Disable". More information available later.
User Controls
IND100064-38
- Filter
= Set to either "ON" or "OFF".
- VGA Out
- VGA Sel
*Available in "Full Mode" only
*Available in "Full Mode" only
*Available in "Full Mode" only
66