Table of Contents
Advertisement
OSD Menu Overview
OSD Simplified and Full Menu modes (examples)
You may encounter two different menu size setups based on factory default or by customized preset configuration.
The Simplified Menu mode offers easy and clear access to most commonly used functions. The Full Menu mode
offers a more advanced menu with technical information and is suited for more technical minded users.
Simplified
Exit
Input Source Settings
Image Settings
Color Mode Settings
Multi-PIP Settings
OSD Settings
Management Settings
Service
Simplified OSD Menu showing for example "Color Mode Settings"
chosen in the menu. Each of these lines might have additional
submenus where other lists of choices will be seen. The design
and size of OSD menu area does not change.
OSD Visual Feedback (examples)
Throughout all OSD menus there are certain symbols you need to familiarize yourself with. These are to visually
indicate that a value can be increased/decreased, accessed, display a Slide Bar Meter or just for information purposes
only. All functions with arrows have text based, human readable lists with a start and end choices. A Slider Bar with
number beside it will indicate the value has a minimum, current and max limit. All changes in values and lists happen
in real time as you touch the menu button and/or touch navigation buttons.
Arrow pointing right means that there is an submenu available for this
function for further adjustments and functions.
Slider Bar meter indicates the "filling" up based on a minimum and
maximum value. The current value is written to the left.
Norsk
English
Francais
Functions displayed in Green Color indicates either the current stored
value of the function and sometimes to draw user's attention towards
information about an selected function or its current state.
Note: The examples above are the most common ones displayed. Your menu may have slight different style and colors, depending on firmware,
variations and customized solutions, but the logic of operation is the same.
User Controls
IND100064-39
►
34
Analog RGB1
Exit Menu
Input Source
Settings
Image
Settings
Color Mode
Settings
Multi-PIP
Settings
OSD
Settings
Management
Settings
Service
Settings
Full OSD Menu showing for example "Input Source Settings"
chosen in the menu. The left menu bar is visible at all times, while the
right section will change based on contents of that submenu.
The design and size of OSD menu area does not change.
Arrow pointing up/down means that the current choice can be changed
in-place from a list that has a start and end.
Color Mode Settings
Whenever a function is selected, the item will be visually indicated
with a yellow bar behind it. The other choices available will be in white
text with no yellow bar behind.
PIP Mode
PIP Display
SWAP
Functions displayed in gray text means that set of functions may
depend on a different option to be turned on or configured first. In this
example, "PIP" functions are all unaccessible, since "PIP Mode" is "OFF".
43
Input Source Settings
Exit
Main Source:
►
Digital 1
Second Source:
►
Composite 1
Auto Source Select
Enable
Rename Source
Digital 1
OFF
Hide quick links:
Advertisement
Table of Contents
