Hatteland HD 12T21 MMD User Manual page 61

OSD Menu Functions
OSD Settings
|---2---
To prevent accidental activation of Glass Display Control™ (GDC) touch functions, you can add an
extra layer of security on how "sensitve" the touch detection operates. This applies for "MENU",
"(-) Brilliance (+)" and "Power Off" functions. The OSD Key Outdoor function is especially effective if
the unit is located in a outside environment where rain drops could potentionally trigger touch button
functions. Note that this setting does not apply for fullscreen sized touch screen glasses.
Settings as follows:
"Off"
"On"
OSD Settings
|---2---
Assign a commonly used OSD menu function to the available touch enabled Hot Keys which is
located on the front display glass. The following functions are available to assign and most of them
have a negative and positive counting logic. All of these functions are described before and after this
segment in the manual.
Settings as follows (for both "Key 1" and "Key 2"):
"Brightness"
"PIP Size"
"Main Source"
"Second Source"
"PIP Mode"
"Scaling"
"Swap Source"
"Test Pattern"
"LED Drive"
"Language"
"No Function"
● Note:Default Hot Keys are assigned to "No Function". You can assign different functions to "Key 1" and "Key 2".
User Controls
IND100064-38
- OSD Key Outdoor
= All touch symbols operates normally.
= Touch symbols responds when you press and hold it for 5 seconds.
- Hot Key Assignment
= Increase/Decrease Brightness of the TFT panel (not backlight).
= Increase/Decrease the size of the Picture-In-Picture overlay.
= Flip up/down through the available signal sources (to full screen).
= Flip up/down through the available signal sources (to PIP/PBP).
= Flip up/down through the PIP/PBP functions.
= Flip up/down through the scaling methods (Full, 1:1, Fill Aspect)
= Swap the Main Source and Secondary Source appearance.
Both Hot Keys performs the same action.
= Display the internal test image overriding any signal inputs.
Both Hot Keys performs the same action.
= Increase/Decrease the voltage level controlling LED Backlight which
affects the overall brightness strength (not via TFT panel itself).
= Flip up/down through available languages (real-time changes).
= Nothing will be activated when user touches Hot Keys on front glass.
Both Hot Keys performs the same action.
61