Important To Know About Left And Right Brackets - Hatteland HD 12T21 MMD User Manual

Installation Procedures

Important to know about LEFT and RIGHT brackets

Throughout the following installation procedure for both BRD and TMB brackets, it is important to understand the
difference between LEFT and RIGHT brackets. The Display and Panel Computer chassis are not 100% square
boxed, but are slightly designed with a minor narrow angled chassis towards the rear (FIG1) to allow easier "drop-
in" of units into consoles. Likewise to get a correct footprint placement of the brackets, both brackets feature a slight
angled design on the oval circled cut shaped block to compensate for this (FIG2) making LEFT and RIGHT bracket
slightly different and naturally has to be correctly mounted.
Please ensure that LEFT and RIGHT brackets are as indicated in FIG4, and not as shown in FIG3 below.
FIG 1 FIG 2
Red Line straight up Location of angled block,
Green Line indicates slight angled design of chassis and seen straight from top showing slight angle
RIGHT BRACKET
LEFT BRACKET
FIG 3 - Seen from under bracket base FIG 4- Seen from under bracket base
Wrong mounting of LEFT / RIGHT Brackets Correct mounting of LEFT / RIGHT Brackets
Indicating footprint is incorrect Indicating footprint is correct
Installation 29
IND100078-34