Hatteland HD 12T21 MMD User Manual page 56

Series x maritime multi display
Table of Contents

Advertisement

OSD Menu Functions
Multi-PIP Settings
Lets you adjust how the Picture-in-Picture (PIP) or Picture-by-Picture (PBP) display mode is set up. The
default position of the rectangle is set to upper left corner of the Active Display area. Note that this requires
a valid incoming signal to be present in either the VGA or CVBS inputs. The contents of these submenus
are listed below.
Multi-PIP Settings
|---2---
Settings as follows:
"PIP OFF"
"PIP Child"
"PIP Split"
"PIP Wide"
● Note: Default is OFF
Multi-PIP Settings
|---2---
When PIP Child mode is active, the size and position of the rectangle displaying the Secondary
Source can be adjusted via the submenus below.
Multi-PIP Settings - PIP Display
|--------3--------
Settings as follows:
● Note: Default value for all 3 functions is 0.
User Controls
IND100064-38
- PIP Mode
= Picture in Picture is inactive and the other PIP settings can not be
accessed.
= The Secondary Source will be displayed in a small frame as an overlay
over the Main Source signal. When this function is activated a new menu
item will appear under "PIP Mode" called "PIP Display".
= The Main Source and Secondary signal sources are shown side-by-side
with the Main Source to the left and the Secondary Source to the right.
Note that only 50% of each source is actually visible on screen (split in two).
When this function is activated a new menu item will appear under "PIP
Mode" called "PIP Display".
= The Main Source and Secondary signal sources are shown side-by-side in
widescreen mode with the Main Source to the left and the Secondary to the
right. When this function is activated a new menu item will appear under
"PIP Mode" called "PIP Display".
- PIP Display
"PIP Size"
= Adjust the full size (H and V) for Secondary Source,
values from 0 to 7.
"PIP H-Size" = Adjust the Horizontal size for Secondary Source,
values from -10 to +10.
"PIP V-Size"
= Adjust the Vertical size for Secondary Source,
values from -10 to +10.
*Available only when PIP Mode on
-- PIP Child Size
56

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents