Firmware And Configuration Files; Description - Aastra 9143i Series Administrator's Manual

Firmware and Configuration Files

Description

By default on startup, the phone downloada its firmware and configuration files
from the configuration server you have set; or you can manually download the
firmware from the configuration server. The phone supports TFTP, FTP, HTTP
and HTTPS configuration servers.
The IP Phone firmware file (.st) include all the necessary files you need for your
phone.
The firmware consists of the following file:
• <phone model>.st - This file contains information about the specific IP Phone
model and contains the language packs to load to the phone.
The configuration files consist of two files called:
• aastra.cfg - This file contains configuration information about the IP Phone.
• <MAC>.cfg (for example, 00085D1610DE.cfg) - This file contains
configuration information about the IP Phone.
41-001160-04 Rev 02, Release 2.5
Note: Automatic download is dependant on your configuration server
setup. For more information about manual and automatic download of
firmware, see Chapter 8, "Upgrading the Firmware."
information on changing the download protocol on your phone, see
Chapter 4, the section,
on page 4-112.
Firmware and Configuration Files
"Configuring the Configuration Server Protocol"
Overview
For more
1-41