Aastra 9143i Series Administrator's Manual page 860

IP Phone Administrator Guide
Operational, Basic, and Advanced Parameters
Range
Example
Parameter –
sip dial plan terminator
Send Dial Plan Terminator
(in Web UI)
Description
Format
Default Value
Range
Example
A-74
Reference: Up to 512 alphanumeric characters.
Reference:
Reference: If a User enters a dial plan longer than 512 characters, or a
parsing error occurs, the phone uses the default dial plan of "x+#|xx+*". If
this is the case, the Administrator cannot change the dial plan from the
configuration files. The dial plan must be changed from the Aastra Web
UI.
sip dial plan: "X+#|XXX+*"
Aastra Web UI
Configuration Files
Allows you to enable or disable a dial plan terminator. If you enable the
use of this parameter, when you configure the IP phone's dial plan with a
dial plan terminator or timeout (such as the pound symbol (#)), the phone
waits 4 or 5 seconds after you pick up the handset or after to finish
dialing the number on the keypad before making the call.
Boolean
0
0 (Disable)
1 (Enable)
sip dial plan terminator: 1
Basic Settings->Preferences
aastra.cfg, <mac>.cfg
41-001160-04 Rev 02, Release 2.5