Sip Diversion Display - Aastra 9143i Series Administrator's Manual

IP Phone Administrator Guide
Operational, Basic, and Advanced Parameters

SIP Diversion Display

Global Setting
Parameter –
sip diversion display
Description
Format
Default Value
Range
Example
Per-Line Setting
Parameter –
sip lineN diversion display
(N is a line number from
1 to 9)
Description
Format
Default Value
Range
Example
A-184
Configuration Files aastra.cfg, <mac>.cfg
Global parameter that enables/disables the display of the Caller ID and/
or caller name, and reason for diversion on the phones LCD for an
outgoing call that is being diverted to another destination. The phone
that receives the diverted call displays the Caller ID of the original call
destination.
Note: You must restart the phone after setting a value for this parameter.
Boolean
1
0 (disabled - do not display diversion information to the phone's LCD)
1 (enabled - display diversion information to the phone's LCD)
sip diversion display: 0
Configuration Files aastra.cfg, <mac>.cfg
For a specific line on the phone, this parameter enables/disables the
display of the Caller ID and/or caller name, and reason for diversion on
the phones LCD for an outgoing call that is being diverted to another
destination. The phone that receives the diverted call displays the Caller
ID of the original call destination.
Note: You must restart the phone after setting a value for this parameter.
Boolean
1
0 (disabled - do not display diversion information to the phone's LCD)
1 (enabled - display diversion information to the phone's LCD)
sip line1 diversion display: 0
41-001160-04 Rev 02, Release 2.5