Aastra 9143i Series Administrator's Manual page 591

Aastra IP Phone UI
Step Action
6 Use the DOWN arrow key to scroll to the "Number" field. Enter a phone number to apply to the
current state in focus. When the phone is in the state you specified, and a call comes into the phone,
it forwards the call to the number you specify.
Use the BACKSPACE key if required to delete characters.
7 Use the DOWN arrow key to scroll to the "No. Rings" field. Press the CHANGE key to select the
number of rings to apply to the phone for call forwarding incoming calls. Valid values are 1 to 20.
Default is 1.
When the phone receives an incoming call, and call forward is configured on the phone, the phone
rings the number of times you specify in the No. Rings screen, and then forwards the call.
8 Press DONE in the CFWD State Screen to save all changes.
Press DONE in the CFWD Mode Screen to save all changes.
Note: In "Phone" mode, the configuration applies to all the accounts on the phone.
41-001160-04 Rev 02, Release 2.5
Configuring Operational Features
Operational Features
5-285