Aastra 9143i Series Administrator's Manual page 488

IP Phone Administrator Guide
Operational Features
Configuring the BLF/Xfer Key and the Speeddial/Xfer Key Using the
Configuration Files
You use the following parameters in the configuration files to configure the
BLF/Xfer key and/or Speeddial/Xfer key on the IP Phone.
Softkey Parameters
softkeyN type
softkeyN label
softkeyN value
softkeyN line
softkeyN states
Top Softkey Parameters
topsoftkeyN type
topsoftkeyN label
topsoftkeyN value
topsoftkeyN line
Examples:
softkey1 type: speeddialxfer
softkey1 label: BX7801
softkey1 value: 7801
softkey1 line: 1
softkey1 states: idle connected incoming outgoing busy
prgkey1 type: blfxfer
prgkey1 value: 35
prgkey1 line: 1
Refer to the following in Appendix A to configure a BLF/Xfer and Speeddial/Xfer
key on the IP phone using the configuration files.
Configuration Files
To set a BLF/Xfer and Speeddial/Xfer key using the configuration files, see Appendix A,
Programmable Key/Feature Key/Expansion Module Key Parameters"
5-182
Programmable Key Parameters Expansion Module Parameters
prgkeyN type
prgkeyN value
prgkeyN line
expmodN keyN type
expmodN keyN label
expmodN keyN value
expmodN keyN line
"Softkey/
on page A-217.
41-001160-04 Rev 02, Release 2.5