IP Phone Administrator Guide
Operational Features
Configuring Park /Pickup using Static Configuration
(8 and 11-Line LCD phones only)
Use the following procedures to configure the Park/Pickup call feature using the
static configuration method.
Configuration Files
For specific parameters you can set in the configuration files, see Appendix A, the section,
"Park and Pickup Global Settings (not applicable to 6751i))"
5-64
Note: Aastra recommends you configure either the static or the
programmable configuration, but not both.
on
page A-212.
41-001160-04 Rev 02, Release 2.5