P-Asserted Identity (Pai; Route Header In Sip Packet - Aastra 9143i Series Administrator's Manual

IP Phone Administrator Guide
Advanced Operational Parameters

P-Asserted Identity (PAI)

Parameter –
sip pai
Description
Format
Default Value
Range
Example

Route Header in SIP Packet

Parameter –
sip remove route
Description
Format
Default Value
Range
Example
A-270
Configuration Files
Enables or disables whether the SIP PAI displays to the IP phone.
Boolean
1
0 (disabled)
1 (enabled)
sip pai: 0
Configuration Files
Enables and disables the addition of the Route header in a SIP packet.
Enable this parameter for outbound proxies that do not support Route
headers.
Note: When enabled this will break all support for SIP routing, so if some
other device in the network attempts to add itself to the route it will fail.
Boolean
0
0 (disable - adds the Route header to the packet)
1 (enable - removes the Route header from the packet)
sip remove route: 1
aastra.cfg, <mac>.cfg
aastra.cfg, <mac>.cfg
41-001160-04 Rev 02, Release 2.5