Softkey/Programmable Key/Feature Key/Expansion Module Key Parameters
Parameter –
softkeyN value
Value
(In Web UI)
Description
41-001160-04 Rev 02, Release 2.5
Aastra Web UI
Configuration Files
This is the value you assign to the softkey.
The "softkeyN value" parameter can be set for the following softkey types
only:
•
speeddial
(you can enter a speeddial number for this field;
optionally, you can also enter a prefix for the
speeddial value to allow the phone to dial the prefix
after you press the speeddial softkey; you then
enter the rest of the number from the keypad on the
phone.)
•
blf
•
sprecode
•
park
•
pickup
•
dcp
•
xml
•
blf/xfer
•
speeddial/xfer
•
speeddial/conf
•
paging
Notes:
1.
For speeddial - Value is the phone number, extension, or prefix
number to enter for the softkey.
2.
For blf - Value is the extension you want to monitor.
3.
For sprecode - Value is dependent on services offered by server.
4.
For Park, Pickup - For valid values, see Chapter 5, the section,
"Park/Pickup Call Server Configuration Values"
Park/Pickup examples, see Chapter 5, the section,
Models with 8 and 11-Line LCDs"
5.
For xml - You can specify a URI to use for this XML softkey. The
variables you can use with the XML softkey URI are:
•
$$SIPUSERNAME$$
•
$$SIPAUTHNAME$$
•
$$PROXYURL$$
•
$$LINESTATE$$
•
$$LOCALIP$$
•
$$REMOTENUMBER$$
•
$$DISPLAYNAME$$
•
$$SIPUSERNAME$$
•
$$INCOMINGNAME$$
•
$$CALLDURATION$$
•
$$CALLDIRECTION$$
Operation->Softkeys and XML
aastra.cfg, <mac>.cfg
on
page -239.
on
page
-241. For
"Examples for
A-223