Table of Contents
Advertisement
2-3 Audio Functions
a Microphone
b MIC IN connector
c MIC LEVEL control
a Microphone
This is a supplied directivity super-cardioid stereo
microphone with an external power supply (+48 V)
system.
Assigning the F.MIC MONO/STEREO function to the
ASSIGN 1 switch, ASSIGN 2 switch, or TURBO GAIN
button allows you to switch the output signal of the
microphone connected to the MIC IN connector between
stereo and monaural sound.
For details, see "5-3-5 Assigning Functions to Assignable
Switches" on page 96.
b MIC IN (microphone input) connector (XLR type,
5-pin, female)
Connect the supplied microphone to this connector. A
microphone other than the supplied one may also be
connected if it can operate with the power (+48 V)
supplied from this connector.
c MIC (microphone) LEVEL control
Adjusts the audio level of the microphone connected to the
MIC IN connector.
d EARPHONE jacks (minijacks)
You can monitor the E-E sound
play back sound during playback. Plugging an earphone
into the jack automatically cuts off the built-in speaker.
When an alarm is indicated, you can hear the alarm sound
through the earphone.
d EARPHONE jack (front)
Audio functions (1)
1)
during recording and
h Built-in speaker
d EARPHONE jack (rear)
g ALARM volume control
f MONITOR volume control
e MONITOR switch and CH-1/2 / CH-3/4 switch
You can connect earphones to both connectors at the same
time.
1) E-E: Abbreviation of "Electric-to-Electric." In E-E mode, video and audio
signals input to the camcorder are output after passing through internal
electric circuits only. This can be used to check input signals.
e MONITOR switch and CH-1/2 / CH-3/4 switch
Determine the channel selection for audio monitor output.
CH-1/2 / CH-3/4 switch:
Determines the pair of audio channels selected with the
MONITOR switch.
CH-1/2 position: channels 1 and 2
CH-3/4 position: channels 3 and 4
The signals output from the AUDIO OUT connector and
EARPHONE jacks and the audio level meter in the display
window also depend on the setting of this switch.
MONITOR switch:
Selects the audio monitor channels output to the earphone
or speaker, depending on the setting of the CH-1/2 / CH-3/
4 switch.
MONITOR switch
CH-1/2 / CH-3/4 switch
Audio Functions
19
Advertisement
Table of Contents
