Recording A Recording Start Mark - Sony HDW-790 Operation Manual

When any page of the MAINTENANCE menu is
displayed, turn the MENU knob until the SHOT
MARKER page appears.
4
Push the MENU knob.
b
The mark moves to the currently selected item and
a z mark appears on the left of the setting.
5
Turn the MENU knob to move the
MARKER.
6
Push the MENU knob.
b
The mark at the left of LTC UB-MARKER changes
to a z mark and the z mark at the left of the setting
changes to a ? mark.
7
Turn the MENU knob clockwise or counterclockwise
until the desired setting appears.
The setting changes in the order of SET y ALL y
OFF.
Item Contents
SET Determines whether or not marks are
recorded for the items REC START
MARK, SHOT MARKER 1, and SHOT
MARKER 2 which appear when you
select SET.
ALL Records the recording start mark, good
shot mark 1, and good shot mark 2.
OFF Does not record any markers.
When you select SET, go to step 8.
When you select ALL or OFF, go to step 9.
40
Recording
8
b
mark to LTC UB-
9
Recording a shot mark 1
Press the RET button once. On the viewfinder screen, "z"
and the time code of the marked point are displayed for
about 3 seconds.
Recording a shot mark 2
Press the RET button twice. On the viewfinder screen, "X"
and the time code of the marked point are displayed for
about 3 seconds.
3-2-4 Recording a Recording Start
Mark
You can record a recording start mark at the beginning of
the recording.
Using recording start marks enables quick access to the
marked points, for efficient editing.
For detailed information on recording start marker
operations, refer to the manual supplied with your VTR.
You can set whether or not recording start marks are
recorded using the SHOT MARKER page of the
MAINTENANCE menu.
Set the mark(s) to be recorded to ON.
1 Turn the MENU knob to move the
mark to be set, then push the MENU knob.
2 Turn the MENU knob clockwise or
counterclockwise until the desired setting appears.
To record the mark on the tape, select ON.
To not record the mark, select OFF.
3 Push the MENU knob.
4 To set the remaining marks, repeat steps 1, 2,
and 3.
To end the menu operation, set the MENU ON/OFF
switch to OFF. Or, close the switch cover.
The menu display disappears from the viewfinder
screen and the display indicating the current status of
the camcorder appears along the top and bottom of the
viewfinder.
b
mark to the