Table of Contents
Advertisement
Manual Interval Rec mode
Manual Interval Rec has the following two modes.
Single Trigger mode: Each time the VTR START button
or VTR button on the lens is pressed, the camcorder
captures to memory a single shot consisting of the
specified number of video frames.
Continuous Trigger mode: Once the VTR START button
or VTR button on the lens is pressed, the camcorder
captures consecutive shots to memory at the specified
interval, with each shot consisting of the specified
number of video frames.
Setting Single Trigger mode of Manual
Interval Rec
1
Follow steps 1 to 5 in "To make settings before
shooting" (page 43), to select CACHE/INTVAL REC
on the FUNCTION 1 page.
2
Turn the MENU knob until M. INT appears.
As you turn the MENU knob, the setting changes in
the following sequence: OFF y CACHE y A. INT
y M. INT.
When M. INT appears, the camcorder is in Manual
Interval Rec mode and the TALLY indicator (green) in
the viewfinder flashes. NUMBER OF FRAME,
TRIGGER INTERVAL and RE-LIGHTING appear.
3
Push the MENU knob.
The z mark on the left of CACHE/INTVAL REC
b
changes to a
mark and the ? mark on the left of the
setting changes to a z mark.
4
Turn the MENU knob to move the
NUMBER OF FRAME.
5
Push the MENU knob.
6
7
8
9
10
b
mark to
11
12
b
The
mark on the left of NUMBER OF FRAME
changes to a z mark, and the z mark on the left of the
setting changes to a ? mark.
Turn the MENU knob until the desired number of
frames to be recorded in each shot appears.
As you turn the MENU knob, the number changes in
the following sequence: 1 y 2 y 4 y 8.
Push the MENU knob.
The z mark on the left of NUMBER OF FRAME
b
returns to a
mark and the ? mark on the left of the
setting returns to a z mark.
Turn the MENU knob to move the
TRIGGER INTERVAL.
Push the MENU knob.
b
The
mark on the left of TRIGGER INTERVAL
changes to a z mark and the z mark on the left of the
setting changes to a ? mark.
Turn the MENU knob to display M.
If you turn the MENU knob clockwise or
counterclockwise, the number changes in the
following sequence: M y 1SEC y 2SEC........12H
y 24H.
When M appears, the TALLY indicator (green) flashes
(2 flashes/second) and PRE-LIGHTING disappears.
Push the MENU knob.
The z mark on the left of TRIGGER INTERVAL
b
returns to a
mark and the ? mark on the left of the
setting returns to a z mark.
To end the menu operation, set the MENU ON/OFF
switch to OFF.
b
mark to
47
Recording
Advertisement
Table of Contents
