Table of Contents
Advertisement
camcorder depending on whether or not a remote control
unit, such as the RM-B150/B750, is connected.
Non-volatile memory
Independent data
region
MASTER BLACK
MASTER GAMMA
KNEE POINT
Setup
DETAIL LEVEL
menu of the
R/B GAIN
camcorder
R/B BLACK
Remote control data
RM-B150/
region
B750
MASTER BLACK
MASTER GAMMA
KNEE POINT
DETAIL LEVEL
R/B GAIN
R/B BLACK
As a result, when a remote control unit is connected to the
camcorder, the effective data region is switched to the
"remote control data region" and the settings of the paint
adjustment that were in effect last time the remote control
unit was used are recalled.
Settings of the absolute value volume
2)
switches
are overwritten by those on the remote control
unit after the remote control unit is connected.
When the remote control unit is removed from the
camcorder, the "independent data region" becomes
effective. As a result, the camcorder will return to the
settings that were in effect before the remote control unit
was connected.
1) Absolute value volume
The data corresponding to the rotation degree (position) of the volume
knob is output. The data corresponding to the rotation amount (change) is
called the relative value volume.
2) Absolute value switch
Toggle switches or slide switches (except the temporary switches) (or
controls) whose positions must coincide with their functions are called
absolute value switches.
To use settings of the paint adjustment data
stored in the "independent data region" even
when you disconnect a remote control unit
Set RM COMMON MEMORY to ON on the FUNCTION
3 page of the MAINTENANCE menu.
In this case, the settings stored in the "independent data
region" will be renewed according to the change of settings
in the "remote control data region." As a result, the settings
of the paint data made with the remote control unit can be
retained even if the remote control unit is removed.
However, if the switch position on the remote control unit
differs from the one on the camcorder, the switch position
on the camcorder takes precedence over that on the remote
control unit.
For details on menu operations, see "5-1-2 Basic Menu
Operations" on page 76.
To maintain the video quality when a remote
control unit is connected
Set RM COMMON MEMORY to ON on the FUNCTION
3 page of the MAINTENANCE menu, and set all the
volume values on the remote control unit to the relative
volume values. When a remote control unit has an absolute
value switch, the settings of the absolute volume switch
have a priority over relative value volume settings.
For detailed information on how to set relative volume
Hardware of
value settings, refer to the operation manual supplied with
the camera
the remote control unit.
RM-B150/B750
connected
RM-B150/B750
not connected
1)
and absolute value
Connecting the Remote Control Unit
131
Advertisement
Table of Contents
