Sony HDW-790 Operation Manual page 152

No. Page
P02 WHITE
P03 BLACK/FLARE
P04 GAMMA
152
Menu List
Item Settings
COLOR TEMP <A> Display color
temperature
C TEMP BAL <A> (–99 to 99)
R GAIN <A> (–99 to 99)
B GAIN <A> (–99 to 99)
5600K <A> OFF/ON
COLOR TEMP <B> Display color
temperature
C TEMP BAL <B> (–99 to 99)
R GAIN <B> (–99 to 99)
B GAIN <B> (–99 to 99)
5600K <B> OFF/ON
MASTER BLACK (–99 to 99)
R BLACK (–99 to 99)
G BLACK (–99 to 99)
B BLACK (–99 to 99)
MASTER FLARE (–99 to 99)
R FLARE (–99 to 99)
G FLARE (–99 to 99)
B FLARE (–99 to 99)
FLARE OFF/ON
1) Y/R/G/B
OUTPUT SELECT
GAMMA OFF/ON
STEP GAMMA 0.35 to 0.90
MASTER GAMMA (–99 to 99)
R GAMMA (–99 to 99)
G GAMMA (–99 to 99)
B GAMMA (–99 to 99)
1) Y/R/G/B
OUTPUT SELECT
GAMMA SELECT STD/HG
GAM SEL (STD) 1 to 4
GAM SEL (HG) 1 to 4
Default Description
3200 Sets the color temperature of WHITE A.
(Displayed one is a rough guide only)
0 Adjusts the value more precisely when the
color temperature adjustment through
COLOR TEMP is not satisfactory.
0 Only the value of R GAIN is changed.
0 Only the value of B GAIN is changed.
OFF Turns the WHITE A electronic 5600K filter on/
off.
3200 Sets the color temperature of WHITE B.
(Displayed one is a rough guide only)
0 Adjusts the value more precisely when the
color temperature adjustment through
COLOR TEMP is not satisfactory.
0 Only the value of R GAIN is changed.
0 Only the value of B GAIN is changed.
OFF Turns the WHITE B electronic 5600K filter on/
off.
0 Adjusts the master black level.
0 Adjusts the R black level.
0 Adjusts the G black level.
0 Adjusts the B black level.
0 Adjusts the flare level of the master.
0 Adjusts the R flare level.
0 Adjusts the G flare level.
0 Adjusts the B flare level.
ON Turns the flare correction circuit on/off.
Y Selects the output signal from the TEST OUT
connector, the input signal to the viewfinder,
and the output signal from the VBS/SDI
2)
OUT .
ON Turns the gamma correction function on/off.
0.45 Sets the master gamma correction curve in
steps.
0 Sets the master gamma correction curve.
0 Sets the R gamma correction curve.
0 Sets the G gamma correction curve.
0 Sets the B gamma correction curve.
Y Selects the output signal from the TEST OUT
connector, the input signal to the viewfinder,
and the output signal from the VBS/SDI
2)
OUT .
STD Selects the gamma table.
3 Selects the gamma table of STD.
4 Selects the hyper gamma table of hyper
gamma.