Maintenance Menu - Sony HDW-790 Operation Manual

No. Page
P16 SCENE FILE
1) When Y is selected in the camcorder with an optional HKDW-702, the color signal is output from the connector whose selected output signal is a SD signal.
2) When an optional HKDW-702 is installed, the HD-SDI OUT connector (located on the side of the camcorder) can be used as the VBS/SDI output connector.
3) When either 50i or 25PsF is selected, 105.0 is the factory setting.
4) This item is displayed when an optional HKDW-702 is installed.
5) When either 50i or 25PsF is selected, this item is not displayed.

MAINTENANCE Menu

The following table lists and describes the items in the
MAINTENANCE menu.
When the setting range in the Settings column is
surrounded by parentheses ( ), the setup value is a relative
value. The setting range shown on the menu screen may
differ from what is shown in the manual.
No. Page
M01 WHITE
SHADING
156
Menu List
Item Settings
1 —
2 —
3 —
4 —
5 —
STANDARD —
SCENE RECALL —
SCENE STORE —
F.ID 16 characters
Item Settings
SHADING CH SEL R/G/B/TEST
1) Y/R/G/B
OUTPUT SELECT
R/G/B WHT H SAW (–99 to 99)
R/G/B WHT H PARA (–99 to 99)
R/G/B WHT V SAW (–99 to 99)
R/G/B WHT V PARA (–99 to 99)
WHITE SAW/PARA OFF/ON
Default Description
— Recalls the scene file saved in the memory of
the camcorder.
—
—
—
—
— Clears all current detail-adjusted settings and
switch settings and returns the settings to the
standard settings saved in the reference file.
— Recalls the scene file from the memory of the
camcorder or the "Memory Stick."
— Stores the scene file in the memory of the
camcorder or the "Memory Stick."
— Sets the File ID.
Default Description
TEST Selects the channel adjusted by shading. If
TEST is selected, the setting is the same as
the setting of OUTPUT SELECT.
Y Selects the output signal from the TEST OUT
connector, the input signal to the viewfinder,
and the output signal from the VBS/SDI
2)
OUT .
0 Adjusts the H Saw white shading
compensation.
0 Adjusts the H Parabola white shading
compensation.
0 Adjusts the V Saw white shading
compensation.
0 Adjusts the V Parabola white shading
compensation.
ON Turns white shading Saw and Parabola
compensation on and off.