Sony HDW-790 Operation Manual page 162

No. Page
M10 VTR MODE
M11 SHOT MARKER LTC UB-MARKER
162
Menu List
Item Settings
REC TALLY BLINK OFF/ON
REC START BEEP OFF/ON
LCD DISPLAY TIMER/OFF/CONT TIMER
HOLD
LCD HOLD TIMER 1H/3H/8H
SHOT TIME DISP MD:HM/DM:HM/
D:HMS
VIDEO OUT (F/R) EE/PB
STBY OFF TIMER OFF/5MIN/10MIN/
30MIN/60MIN
STOP KEY FREEZE OFF/FRAME/
FIELD
EMERGENCY ENABL/DSABL
EJECT
SET/ALL/OFF
REC START MARK OFF/ON
SHOT MARKER 1 OFF/ON
SHOT MARKER 2 OFF/ON
Default Description
ON Turns the tally illumination control on/off in the
event of BATTERY BEFORE END/TAPE
BEFORE END.
OFF Turns the alarm sound at REC START/STOP
on/off.
Sets the time code (TC) display after power-
off as follows.
TIMER: The TC display turns off after the
elapse of the time set by the LCD HOLD
TIMER below.
OFF: Not displayed.
CONT: Displayed.
1H Sets the duration of time after which the TC
display is to be turned off after power-off,
when LCD DISPLAY HOLD is set to TIMER
(H: hours).
MD:HM Selects the format of the time to be displayed
on the LCD.
MD:HM: Month, day, hour, minute
DM:HM: Day, month, hour, minute
D:HMS: Day, hour, minute, second
EE Selects the video output signal during FF/
REW.
EE: Input signal
PB: Playback signal
60MIN Sets the length of time for the stand-by off
timer when the VTR SAVE/STBY switch is set
to STBY.
OFF Selects the type of frozen picture to be used
when the recorded video signal is stopped by
pushing the STOP button during playback.
DSABL Sets whether the emergency cassette
ejection is permitted when an error is
detected or not.
ENABL: Emergency cassette ejection is
permitted when any type of error occurs.
DSABL: Emergency cassette ejection is
prohibited when the tape may be damaged
by ejecting the cassette.
SET Sets whether to write the markers in UBIT of
LTC or not.
SET: To independently select the ON/OFF
setting of the following items, REC START
MARK, SHOT MARK 1, and SHOT MARK
2
ALL: To write REC START MARK, SHOT
MARK 1, and SHOT MARK 2 all.
OFF: None are written.
OFF Turns REC START MARK on/off.
OFF Turns SHOT MARK 1 on/off.
OFF Turns SHOT MARK 2 on/off.