Table of Contents
Advertisement
For more information, refer to the BKW-401 manual.
7-2-4 Detaching the Eyepiece
Removing the eyepiece gives a clearer view of the screen
from further away. It is also easy to remove dust from the
viewfinder screen and mirror when the eyepiece is
detached.
1
Turn the eyepiece locking ring fully counterclockwise,
to align the red marks on the locking ring and the
viewfinder barrel.
Red mark
Red mark
Locking ring
2
Detach the eyepiece.
To reattach the eyepiece
1
Align the red marks on the eyepiece locking ring and
the viewfinder barrel.
2
Align the red mark on the end of the eyepiece end with
the red marks on the eyepiece locking ring and the
Line up the red marks.
viewfinder barrel. Then insert the eyepiece into the
viewfinder barrel.
Red mark on the end of the eyepiece
3
Turn the eyepiece locking ring clockwise until its
"LOCK" arrow points at the red mark on the
viewfinder barrel.
Note
When the eyecup is worn out, replace it with a new one
(service part number 3-723-079-03).
121
Adjusting the Viewfinder
Advertisement
Table of Contents
