Table of Contents
Advertisement
No.
Page
Item
F07
LENS FILE 2
LENS M VMOD
LENS CENTER H
LENS CENTER V
OUTPUT SELECT
LENS R FLARE
LENS G FLARE
LENS B FLARE
LENS W-R OFST
LENS W-B OFST
F08
LENS FILE 3
SHADING CH SEL
OUTPUT SELECT
LENS R/G/B H SAW
LENS R/G/B H PARA
LENS R/G/B V SAW
LENS R/G/B V PARA
IMAGE INVERT
F09
MEMORY
M.S. FORMAT
STICK
M.S. IN > JUMP TO
F10
TELE FILE
TELE FILE CLEAR
TELE FILE MARK
ID
SIZE
REMAIN
STATUS
1) This USER FILE page has been also registered in the USER menu at the factory. This, you can access this page without accessing the TOP menu.
2) Displays only when a "Memory Stick" in which user gamma files are stored is inserted.
3) When Y is selected in the camcorder with an optional HKDW-702, the color signal is output from the connector whose selected output signal is an SD signal.
4) When an optional HKDW-702 is installed, the HD-SDI OUT connector (located on the side of the camcorder) can be used as the VBS/SDI output connector.
5) This item is displayed when an optional HKDW-905R is installed.
Settings
Default
(–99 to 99)
0
–480 to 479
0
–270 to 269
0
3)
Y/R/G/B
Y
(–99 to 99)
0
(–99 to 99)
0
(–99 to 99)
0
(–99 to 99)
0
(–99 to 99)
0
R/G/B/TEST
R
3)
Y/R/G/B
Y
(–99 to 99)
0
(–99 to 99)
0
(–99 to 99)
0
(–99 to 99)
0
5)
OFF/ON
OFF
—
EXEC
OFF/USER/
OFF
ALL/SCENE/
LENS/REFER/
USER1
—
EXEC
OK/NG/KP
OK
20 characters
—
0 to 9999
KBYTE
0 to 100
%
STANDBY/NO
—
LABEL/
WRITE
PROTECT/
UNKNOWN
FORMAT/
UNFORMAT/
MEMORY
FULL/NEAR
FULL
Description
For lens file V Saw shading
For the horizontal position compensation of
lens file center marker
For the vertical position compensation of lens
file center marker
Selects the output signal from the TEST OUT
connector, the input signal to the viewfinder,
and the output signal from the VBS/SDI OUT
Adjusts the lens file flare (R).
Adjusts the lens file flare (G).
Adjusts the lens file flare (B).
Adjusts the white R compensation value for the
lens file.
Adjusts the white B compensation value for the
lens file.
Selects the channel adjusted by shading. If
TEST is selected, the setting is the same as
the setting of OUTPUT SELECT.
Selects the output signal from the TEST OUT
connector, the input signal to the viewfinder,
and the output signal from the VBS/SDI OUT
For the H Saw white shading compensation for
the lens file
For the H Parabola white shading
compensation for the lens file
For the V Saw white shading compensation for
the lens file
For the V Parabola white shading
compensation for the lens file
Turns the image inversion function on/off.
Formats a "Memory Stick."
See "6-3 Jumping to a File-Related Menu Page
When Inserting a "Memory Stick"" on page
116.
See "3-4 Recording the Recording Start Time
Code onto the Memory Label — Tele-File" on
page 53.
Displays the status under which the Tele-File
mark function is to be used.
4)
.
4)
.
167
Menu List
Advertisement
Table of Contents
