Table of Contents
Advertisement
To cancel the selected scene file
b
mark to x, then push the MENU knob. x
Move the
changes to s.
The camcorder returns to the settings before selecting
this scene file.
To load a scene file saved in the “Memory Stick”
b
1 Turn the MENU knob to move the
mark to
SCENE RECALL, then push the MENU knob.
The SCENE RECALL page appears.
2 Turn the MENU knob until the page that contains
the desired file number appears, then push the
MENU knob.
b
3 Turn the MENU knob to move the
mark to the
desired file number, then push the MENU knob.
When loading is completed, the message
“COMPLETE” appears.
If no file is present with a particular file number, this is
shown as “NO FILE.”
4
To end the menu operation, set the MENU ON/OFF
switch to OFF.
Loading scene files from a “Memory Stick”
into the camcorder memory
You can load up to five scene files stored in the “Memory
Stick” into the camcorder memory in a single operation.
1
After displaying the SCENE FILE page, turn the
b
MENU knob to move the
mark to SCENE
RECALL, then push the MENU knob.
A SCENE RECALL screen appears.
2
Turn the MENU knob until the page that contains the
desired scene files appears, then push the MENU
knob.
3
b
Turn the MENU knob to move the
mark to 5FILE
b
LOAD
MEM 1-5, then push the MENU knob.
When loading is complete, the message
“COMPLETE” appears and the ACCESS indicator
goes off.
4
To end the menu operation, set the MENU ON/OFF
switch to OFF.
Notes
• The scene files loaded from the “Memory Stick”
overwrite data saved in the camcorder memory.
• To load the scene file saved in the camcorder memory
when the “Memory Stick” is inserted, return to the
SCENE RECALL display and load the desired scene file
in the camcorder memory.
• When there is no file to be loaded (shown as “NO
FILE”), an existing file of the same number is
unaffected. In the example shown in step 3, MEM(3) is
not overwritten.
6-2-3 Resetting the Camcorder
Settings to the Standard Settings
Saved in the Reference File
You can reset the settings of the camcorder to the settings
saved in the reference file (standard settings).
For details about the items in the reference file, refer to the
Maintenance Manual.
1
After displaying the SCENE FILE page, turn the
b
MENU knob to move the
mark to STANDARD,
then push the MENU knob.
The s displayed on the left of STANDARD changes
to x. The settings of the camcorder are reset to the
settings saved in the reference file.
Page 115
Advertisement
Table of Contents
