Saving And Loading Scene Files; Saving A Scene File - Sony HDW-790 Operation Manual

When the load is completed, the message
"COMPLETE" appears and the ACCESS indicator
goes off.
The USER FILE page appears again.
5
To end the menu operation, set the MENU ON/OFF
switch to OFF.
If data cannot be loaded
If one of the following error messages appears during or
after the load operation, then the data was not loaded.
Data load error messages
Error message Cause
NO MEMORY No "Memory
STICK (flashing) Stick" is inserted.
MEMORY STICK Circuit or
ERROR "Memory Stick"
(flashing) fault.
OTHER The "Memory
MODEL'S FILE Stick" contains
(flashing) data that cannot
be loaded into this
camcorder.
112

Saving and Loading Scene Files

6-2 Saving and Loading
Scene Files
You can save various settings for shooting a particular
scene as a scene file. Loading the scene file, you can
quickly recreate setup conditions suitable for the scene.
You can save up to five scene files in the camcorder
memory and up to 100 scene files in a "Memory Stick."
You can also load data from the "Memory Stick" into the
camcorder memory.
Action
Insert or reinsert the
Data that can be saved in a scene file
"Memory Stick."
You can save the following data in a scene file:
Recheck, and
consult your Sony
• Values adjusted using the PAINT menu (except the items
representative.
Do not try to load
data saved from
• Shutter speed settings made in the standard mode and
another camcorder.
The white balance data can be loaded only when the
SCENE WHITE DATA setting on the REFERENCE page
of the FILE menu is ON.

6-2-1 Saving a Scene File

To save a scene file in the "Memory Stick," insert the
"Memory Stick" before starting the operation.
1
2
3
that return to the default values when power is on, such
as OUTPUT SELECT)
ECS mode
In the TOP menu, select the FILE menu.
Turn the MENU knob until the SCENE FILE page
appears, then push the MENU knob to select the page.
Alternatively, select SCENE FILE on the CONTENTS
page to display the SCENE FILE page.
SCENE FILE page
If you want to set a file ID for the data to be saved
Set the file ID before going to step 3.
For details on setting the file ID, see "Setting the file
ID" on page 114.
Turn the MENU knob to move the
STORE, then push the MENU knob.
b
mark to SCENE