Standing Up Your Saw - SawStop PCS31230 Owner's Manual

Standing Up Your Saw

1. Your saw is shipped horizontal to protect it from tipping during transit. To stand up your saw, fi rst remove all
packing materials and accessories from the shipping pallet (see Fig. 1). There is a poster that ships with the
saw that shows where all of the accessories are located in the packaging.
2. Take the top piece of Styrofoam and place one of its short sides next to the pallet by the back of the saw,
as shown in Fig 2a. Place the Styrofoam so that the top edge of the table and the bottom edge of the saw
14 SawStop 10" Professional Cabinet Saw
the bottom edge
of the saw should
overhang the edge
of the Styrofoam
Fig. 2a
top piece of
Styrofoam
Fig. 1
the edge of the
table should
overhang the edge
of the Styrofoam
Fig. 2b