Mounting The Switch Box - SawStop PCS31230 Owner's Manual

Assembling Your Saw

Mounting the Switch Box

7. The hardware required to mount the switch box is located in the area with the orange background on the Table
Saw Hardware Pack. Remove two M6 x 20 button head socket screws, two M6 lock washers and two M6
washers and place a lock washer followed by a washer on the end of each screw. Mount the switch box under
the left extension wing by inserting the screws into the two holes at the upper end of the switch box mounting
bracket (see Fig. 28) and threading them into the holes towards the front of the left extension wing (see
Fig. 29). Tighten the screws with a 4 mm hex key.
Installing the Handwheels Mounting the Dust Port
Hardware for Steps 2-3
1 2
Keys, Set Screws, Button Head Screws,
5 x 5 x 25 (2) M6 x 8 (2) 3
Mounting the Extension Wings
Hardware for Step 6
Washers, 7 Lock Washers, M8 (8)
6
M8 (8)
Mounting the Switch Box
Hardware for Step 7
9 Button Head Socket Screws,
M6 x 20 (2)
11
Lock Washers,
10 M6 (2)
Blade Spacing
Adjustment Gauge (1)
Hex Key, M8 (1)
Tools
F
22 SawStop 10" Professional Cabinet Saw
Mounting
Hardware for Step 4 the
Lock Washers, Motor
M5 x 3 x 15 (3) 4 M5 (3)
Cover
Hardware for Step 5
Mounting the
Wrench & Tool
Holders
8 Hex Bolts, M8 x 16 (8)
Hardware for Step 8
Blade
Wrench
Holder
13
14 15
Lock Button Head
Washers, Screws,
Washers, M6 (2)
M6 (2) M6 x 12 (2)
Switch Box
Keys (2)
12
Motor
Cover
Rod
5
Hex Keys: M3 (1), M4 (1), M5 (1), M6 (1)
mounting
holes
10
11
Fig. 29
switch box
mounting
bracket
Fig. 28
9