Mounting The Extension Wings - SawStop PCS31230 Owner's Manual

Assembling Your Saw

Mounting the Extension Wings

6. The hardware required to mount the cast iron extension wings to the cast iron table top is located in the area
with the purple background on the Table Saw Hardware Pack. Position one of the extension wings next to
the left side of the cast iron table with the chamfer toward the front and align the holes in the side of the wing
with the four threaded holes on the side of the table (see Fig. 26). Mount the left extension wing with four M8
washers, four M8 lock washers and four M8 x 20 hex bolts, but do not tighten. Repeat the same procedure to
mount the other extension wing to the right side of the table.
Installing the Handwheels Mounting the Dust Port
Hardware for Steps 2-3 Hardware for Step 4
1 Keys, 2 Set Screws, Button Head Screws, Lock Washers,
5 x 5 x 25 (2) M6 x 8 (2) 3 M5 x 3 x 15 (3) 4 M5 (3)
Mounting the Extension Wings Mounting the
Hardware for Step 6 Wrench & Tool
Holders
Washers, 7 Lock Washers, M8 (8) 8 Hex Bolts, M8 x 16 (8)
6
M8 (8)
Hardware for Step 8
Blade
Wrench
Holder
Mounting the Switch Box
13
Hardware for Step 7
9 Button Head Socket Screws,
14
M6 x 20 (2) Lock
Washers,
Lock Washers, 11 Washers, M6 (2)
M6 (2)
10 M6 (2)
Switch Box
Keys (2)
12
Blade Spacing
Adjustment Gauge (1)
Hex Key, M8 (1)
Hex Keys: M3 (1), M4 (1), M5 (1), M6 (1)
Tools
F
Use a straight-edge to level the extension
wings with the cast iron table top and
tighten all of the M8 x 20 hex bolts with
a 13 mm wrench (see Fig. 27).
Mounting
the
Motor
Cover
Hardware for Step 5
15
Button Head
Screws,
M6 x 12 (2)
Motor
Cover
Rod
5
8
7
6
Fig. 26
Fig. 27
SawStop 10" Professional Cabinet Saw 21