Electrical Power Connection For A 208-240V, 3 Hp Saw (Pcs31230) - SawStop PCS31230 Owner's Manual

Preparing Your Saw for Use

Electrical Power Connection for a 208-240V, 3 hp Saw (PCS31230)

WARNING! Do not connect the saw to electrical power until the saw is
completely assembled and you have read and understood this entire manual.
The Professional Cabinet Saw model number PCS31230 comes with an AC motor that is rated at
operates at 60 Hz. It can be used
power. Do not use any other motor to power your saw.
The Professional Cabinet Saw model PCS31230 is shipped with a 9 ft power cord that has a NEMA 6-15P
plug designed for use with matching single phase
you need to replace the plug with a different style of plug designed for 208-240V, follow the instructions on
page 36.
Attempting to operate the Professional Cabinet Saw model PCS31230 with power other than 208-240V
single phase power will void all warranties and may result in serious injury as well as damage to, or a malfunction
of, the saw or safety system.
motor
WARNING! This saw must be connected to a grounded wiring system, or to a system having an equipment-
grounding conductor. Failure to connect this saw to an adequate electrical ground may cause the safety
system to malfunction and could result in a serious injury or electric shock.
with single phase 208-240V
230V, 60Hz
Fig. 52
power. The motor draws 13 amps
power outlets. If you need a longer cord, or if
SawStop 10" Professional Cabinet Saw
3 hp and
at 208-240V
35