Back - Extio F2208; Back - Extio F2408; Step-By-Step Connection Setup - Matrox Extio F2208 User Manual

Back – Extio F2208
Power connector
Back – Extio F2408
Power connector

Step-by-step connection setup

Connect your USB cable
1
Connect one end of your USB cable
included with your product to the USB
connector on your interface card. Connect
the other end of your cable to a USB
connector on the motherboard of your
system. Make sure your connectors are
properly connected.
Note:
must be connected from your interface card to your computer. Also, to use the audio
hardware of your unit after your operating system has started, this cable must be connected.
12 Matrox Extio Series – User Guide
Monitor connectors
(DisplayPort)
Monitor connectors
(DisplayPort)
To use a keyboard with your unit before your operating system starts, the USB cable
USB connectors
(Version 2.0)
Optical
connector
USB connectors
(Version 2.0)
Optical
connectors
USB cable
Line-out
connector
Line-out
connector
Interface card