Connect your monitors
3
Connect your monitors to the monitor
connectors (starting with connector
the back of your Extio unit.
If your monitor has a DisplayPort
connector, connect your monitor directly to
a DisplayPort connector at the back of your
unit.
If your monitor has a DVI-D connector, use
a DisplayPort to DVI-D adapter to connect
your monitor cable to the DisplayPort
connector at the back of your unit.
WARNING:
DisplayPort connector on your DisplayPort
monitor cable or on your Matrox product,
carefully remove the DisplayPort cable by
pressing the latch on the top of the DisplayPort
connector while removing the connector.
Connect your power supply
4
Attach one end of the power supply cable
provided with your Matrox product to the
power connector on your Matrox product.
Plug the power supply cord into an electrical
outlet.
14 Matrox Extio Series – User Guide
) at
1
To avoid damaging the
Monitor
connector
(DisplayPort)
DisplayPort to
DVI-D adapter
Monitor
connector
(DVI-D)
Power
supply
cable