Options - Matrox Extio F2208 User Manual

Options

This screen allows you to change the options of your setup utility.
Show temperature in ºC
Enable system restart
Change current unit
Change password
Save and exit
Cancel and exit
Note:
password.
Enable or disable the listing of temperatures in the
Celsius instead of Fahrenheit.
Enable or disable the use of the keyboard to restart your system
remotely after shutting it down.
This feature requires that power be supplied to the +3.3V (Aux)
connector of your interface card (see the
interface card). Certain systems may not support this feature.
Change the Extio unit you want to configure. This option is
unavailable if only one unit is connected.
Change your current password. The default password is
You have three attempts to enter the correct password. If you
exceed your three attempts, you need to restart your Extio unit
to try again or to save your changes.
Save your current settings and exit the setup utility. This is the
same as pressing [Esc]. You need to enter the password to save
your changes. The default password is
Cancel and discard all changes made to your Extio unit and its
associated interface card, and exit the setup utility.
If you lose your password, contact your vendor for information on resetting your
Info
screen for your
Info
.
admin
Matrox Extio Series – User Guide 29
screen in
.
admin