Audio; Notes - Matrox Extio F2208 User Manual

Audio

USB audio
Stereo audio
Bits per sample
Sampling rate
Frequency response
Audio connector type
Line-in connector
Line-out connector
Headphones connector
Microphone connector

Notes

Your Matrox graphics card is 100% VGA compatible, It's also compatible with the
following VESA® standards: VBE 3.0 (Super VGA modes), DPMS (energy saving), and
DDC-2B (Plug-and-Play monitor), DDC-CI, and DisplayPort 1.1a.
You must use the same firmware version for your interface cards and Extio units. Using
different firmware versions for your Extio products isn't supported. For more
information on firmware versions, contact your system integrator or the hardware
vendor of your Extio product.
To get the most of your Matrox product, we recommend using the highest color palette
setting (a 32-bit color palette) for all your displays.
The display resolutions and refresh rates available depend on your Matrox graphics
hardware, display driver, software monitor settings, and monitor. For information on the
capabilities of your monitor, see your monitor documentation.
52 Matrox Extio Series – User Guide
1.0 compliant
2 channel
16 bits per channel, 2 channel (Left and Right)
48 kHz
20 Hz to 20 kHz
3.5 mm stereo audio jacks
Full-scale voltage: 1 V
Minimum impedance: 10k Ohms
THD+N: -75 dB
SNR: 85 dB
Full-scale voltage: 1 V
Minimum impedance: 10k Ohms
THD+N: -80 dB
SNR: 90 dB
Minimum impedance: 16 Ohms
THD+N: -75 dB
SNR: 87 dB
THD+N: -69 dB
SNR: 80 dB
(2.83 V )
RMS P-P
(2.83 V )
RMS P-P