Configuring your Extio unit
This section describes the options available through the Extio Setup Utility. You can use the setup
utility to view information on your Extio setup, to check its operating status, and to enable or disable
connectors.
Note: When exiting the Extio setup utility, your system automatically restarts.
Accessing the Extio setup utility
To access the Extio setup utility, press [F7] before your operating system starts.
Note:
[Space] or another key to access additional ROM menus when your system starts. To access
the setup utility, follow the on-screen instructions.
If more than one Extio unit is connected to your system, select the unit you
want to configure (you can only configure one unit at a time). Units are
listed by serial number. While a unit is selected, its status and power LEDs
are blinking orange.
24 Matrox Extio Series – User Guide
On certain systems, an umbrella menu may appear instead asking you to press