Digital Flat Panel Information - Matrox Extio F2208 User Manual

The display resolution and monitor settings (such as refresh rate) will be the ones
selected in Matrox PowerDesk multi-display settings.
Only basic USB keyboard fonctionality is supported with your Extio unit before your
operating system starts. Advanced keyboard features (such as audio controls or
application keys) and mouse are supported only after your operating system starts.
Your Extio unit supports wake from sleep/standby in Save to RAM (or S3) standby mode.
Standby mode is defined in your system BIOS.
Only HID (Human Interface Devices) USB devices (such as a keyboard or mouse) are
supported with an Extio unit.
Isochronous USB devices (for example, USB audio and video devices such as a
microphone or Web cam) aren't supported with an Extio unit.
An Extio F2208 or F2408 unit can only be connected to an interface card. An F2408E
Expander unit can only be connected to an Extio F2408 unit.
You can use up to two (2) interface cards in your system.
Certain systems may not be supported with your Extio unit. For more information,
contact your Matrox sales representative.

Digital flat panel information

DDWG (Digital Display Working Group) DVI (Digital Visual Interface) 1.0 support
EDID (Extended Display Identification Data) 1.2 and 1.3 support
VESA (Video Electronics Standards Association) Display Data Channel (DDC) support
Compatible with VESA (Video Electronics Standards Association) DisplayPort 1.1a
Matrox Extio Series – User Guide 53