Changing the Battery
CAUTION: To reduce the risk of fire or personal injury, use only
the approved Nickel-metal Hydride battery (Ni-MH), which is
compatible with this unit .
Make sure the telephone is OFF (not in TALK mode) before yo u replace
2. Remove the battery compartment cover.
Disconnect the cord attached to the battery pack and remove the
battery pack from the handset .
4. Insert the new battery pack and connect the cord to the jack inside the
Put the battery compartment cover back on.
Place handset in the base to charge. Allow the handset battery to
properly charge (for 16 hours) prior to first use or when you install a
new battery pack. If you do not properly charge the phone, battery
performance will be compromised.
Battery Safety Precautions
Do not burn, disassemble, mutilate, or puncture. Like other batteries of
this type, toxic materials could be released which can cause injury.
To reduce the risk of fire or personal injury, use only the Nickel-metal
Hydride battery listed in the User's Guide.
Keep batteries out of the reach of children.
Remove batteries if storing over 30 days.
The following messages show the status of the phone, provides Caller
ID information, or helps you set up and use your phone.
Indicates the person is calling from a
number which is blocked from transmission.
Indicates you may use the handset to
screen calls before answering the call.
Indicates the handset needs to charge for a
period of time before it can resume normal
Prompt asking if you want to erase all CID