NOTE: Before you intercom/page another handset , you must
decide whether you want to create a two-way or a three-way
During an external call, press the delete/int/conf button, and use the
touch-tone pad to enter the handset number to put an external line on
hold. The user may then auto intercom with the paged handset .
NOTE: Both intercom users may speak privately. The external
caller will not hear the intercom conversation.
When finished, press the END button to end the intercom call, return to
the talk mode, and resume your original telephone conversation.
During an external call, press the delete/int/conf button. The screen
displays LINE ON HOLD EXTENSION?
Use the touch-tone pad to select Handset # to enter into auto intercom
call with paged handset.
When the receiving handset connects, press the delete/int/conf
button on the originating handset to conference with the receiving
handset and the external caller. The screen displays CONFERENCE on
the originating and receiving handsets.
NOTE: A handset can enter conference mode directly by
pressing TALK/SPEAKER on the second handset during a call.
Transferring External Calls to Other Handsets
During an external call, you may transfer the external call to another
1. Press the delete/int/conf button on the originating handset to put an
external call on hold, and enter the paged handset number.
A long beep is heard and then the two handsets are immediately
connected. Receiving handset shall immediately come into the auto
intercom mode that both "microphone" and "speaker" of this receiving
handset shall be enabled such that the user of receiving handset can
freely talk and listen to the conversation.
When the receiving handset connects, press the END button on the
originating handset to transfer the call.
Caller ID (CID)
IMPORTANT: In order to use this unit's Caller ID features, you must
subscribe to either the standard Name/Number Caller ID Service or C