Installing the Phone
Installing the Handset Battery
NOTE: You must connect the handset battery before use.
CAUTION: To reduce the risk of fire or personal injury, use only
the approved Nickel metal Hydride battery(Ni-MH) (Brand
name: SANIK, Model name:2SN-AAA55H-S-J1, Capacity:
2.4V/550mAh; Brand name: BYD, Model name: H-AAA550BX2,
Capacity: 2.4V/550mAh; Brand name:Corun, Model name:
NI-MH AAA550*2, Capacity: 2.4V/550mAh), that is compatible
with this unit .
Locate battery and battery compartment cover which are packaged
together inside a plastic bag and are separate from the handset.
Locate the battery compartment on the back of the handset.
3. Plug the battery pack cord into the jack inside the compartment.
NOTE: To ensure proper battery
installation, the connector is keyed
and can be inserted only one way.
4. Insert the battery pack.
5. Close the battery compartment by
pushing the door up until it snaps into
Choose an area near an electrical outlet and a telephone wall jack
(RJ11C), and place your cordless telephone on a level surface, such as
a desktop or tabletop, or you may mount it on the wall.
Plug one end of the telephone line cord into the TEL LINE jack on the
back of the base and the other end into a modular jack.
3. Plug the AC power converter into the electrical outlet and the DC
connector into the jack on the back of the base.