Table of Contents
Advertisement
Changing a Stored Number
Follow the same steps as "Storing a Number into Memory." The new numbers
will overwrite the existing numbers.
Dialing a Number from Memory
You can dial numbers from memory when using the handset or speakerphone.
When you get a dial tone, press the one-touch memory button for the number
you want to dial.
Troubleshooting Guide
No dial tone
• Check installation:
Make sure the telephone line cord is connected to the base unit and the
wall phone jack.
• Check the hook switch. Make sure it fully extends when the handset is lifted
from the cradle.
• You must have touch-tone service on your line to use this phone. If you do
not know what type of service you have, check with the phone company.
• Make sure speakerphone indicator comes on (if using speakerphone.)
• Unplug the phone, wait 30 seconds, and plug the phone back in. Then lift
the handset to check the dial tone.
• Connect another phone to the same modular jack; if the second phone
doesn't work, the problem might be with your wiring or local service.
• Place the handset in the base for at least 20 seconds.
Phone doesn't ring
• Make sure ringer switch is set to LO or HI.
• You may have too many extension phones on your line. Unplug some
extension phones.
• Check for a dial tone. If there is no dial tone, see solutions for "No dial tone."
Low handset or speaker volume
• Check the receiver or speaker volume settings.
Can't be heard by other party
• Make sure phone cord is securely plugged in.
• Make sure extension phones are on the hook at the same time you're using
the phone. It is normal for the volume to drop when additional extension
phones are used at the same time.
Hide quick links:
Advertisement
Table of Contents
