Download Print this page

Auto Talk; Registration - RCA 2111 User Manual

Dect 6.0 multi-handset speakerphone
Hide thumbs

Advertisement

confirmation tone and the screen displays the selected language.

Auto Talk

When this function is ON, during an external call, you may lift the handset
to answer a call immediately without pressing any buttons.
To end a call, put the handset back on the base cradle directly.
From the Initial Setup Menu:
1. Press the caller ID-volume ( or ) button to scroll to the AUTO TALK
sub-menu.
2. Press mute/menu OK button to enter the menu. The screen displays >
NO YES.
Use the caller ID-volume ( or ) button to scroll to your selection.
3.
NO is the default setting.
4. Press the mute/menu OK button to confirm.

Registration

Your packaged handset(s) are pre-registered and ready to use. It is not
recommended that a handset be registered again unless absolutely
necessary.
From the Initial Setup Menu:
1. Press the caller ID-volume ( or ) button to scroll to the
REGISTRATION sub-menu.
2. Press the mute/menu OK button to enter the menu. The screen
displays YES NO. The default setting is NO.
Use the caller ID-volume ( or ) button to scroll to YES or NO.
3.
4. If you select YES, press the mute/menu OK button. The screen displays
HOLD BASE FIND FOR 5 SECONDS, THEN PRESS MENU OK KEY. (Your
handset should be held near the base during registration process.)
5. Press and hold the find button on the base unit , the charge/in use
indicator flashes. Press the handset mute/menu OK button.
The screen displays REGISTERING, then the screen displays
REGISTERED. You may now rename your handset . (Refer to Step of
Handset Name Section)
NOTE: If you are re-registering the handset through the handset
menu; to rename your handset you must go to the Handset
Name Section and start from the beginning step.
18

Advertisement

loading

  Related Manuals for RCA 2111

This manual is also suitable for:

2111-22111-32111-4