Use the touch tone pad to enter the handset name/number to be
NOTE: When this phone system is expanded (up to 4 handsets
by purchase of optional Model 2110 handset with recharge
cradle), handsets are named HANDSET 1, HANDSET 2, HANDSET
3 and so on respectively.
The receiving handset will turn on the microphone and the originating
handset will turn on the speakerphone to monitor sound from the
receiving handset .
NOTE: For room monitoring mode to work, the originating
handset must NOT be on the cradle.
NOTE: While in room monitoring mode, the handsets will emit
an alert tone approximately every 5 seconds if there is an
incoming call. You may press the TALK/SPEAKER button to quit
room monitor and answer the call.
NOTE: While in room monitoring mode, the originating handset
can be switched to monitor by handset earpiece by pressing
the TALK/SPEAKER button once. Switch back to speakerphone
by pressing the TALK/SPEAKER button once.
NOTE: Press the END button on the handset to exit room
Make sure your phone is OFF (not in TALK mode)
2. Press the mute/menu OK button to go to the main menu.
Use the caller ID-volume ( or ) button to scroll to ALARM CLOCK.
4. Press mute/menu OK button to enter the menu. The screen displays
ON > OFF.
Use the caller ID-volume ( or ) button to select ON or OFF. Press
mute/menu OK button to confirm.
6. If ON is selected, then the screen displays SET ALARM TIME. Use the
number keys to enter the alarm time (for example, 02:10PM) key in
0210. Use the caller ID-volume ( or ) button to select AM or PM.
7. Press mute/menu OK button to display >ONCE OR DAILY and select
ONCE or DAILY.
8. Press the mute/menu ok button to save selection. You will hear a
confirmation tone and return to main menu.